Anchor support made of rebar rolled screw profile AN 16V, AN20V, AN22V, AN25V
Analogues:
АВ; АСВ; АКМ
Application area
Anchor support made of rebar rolled screw profile of the ANV type is designed for fixing the roof, sides and soil of mine workings of mines and mines. Anchoring of the anchor in the hole is carried out using ampoules based on polyester resins and / or mineral compositions.
Completeness
- rod made of reinforcing steel screw profile;
- the nut is spherical;
- support washer;
- passport.
Specifications
The name of the indicator | Meaning | |||
| АN16В | АN20В | АN22В | АN25В | |
| Temporary tensile resistance of the anchor rod material, MPa, not less | 240 | |||
| Bearing capacity of the support, kN, not less | 150 | 185 | 205 | 246 |
| Rod diameter, mm, min/max | 14,5/18,5 | 20/23 | 22/25 | 25/29 |
| Height of the support washer, mm | 18-33 | |||
| Length and width of the support washer, LxW, mm | 100х100, 150х150, 200х200, 250х250, 300х300 | |||
| The thickness of the support washer, mm | 3-8 | |||
| Height of the spherical nut, mm | 35 | 42 | ||
| Diameter of the spherical nut, mm | 50 | |||
Meets the requirements of TU 3142-002-16375400-2015 and GOST 31559-2012
Our specialist will answer your questions