Anchor rope AKS

Analogues: АК-01, АКС-15
Анкер канатный АКС
Application area

The cable anchor of the AKS type is designed for fixing capital and preparatory mining workings, as well as their interfaces as a second-level anchor together with first-level anchors or frame fasteners, as well as for foundation-free fastening of equipment to the soil of workings, installation of a monorail suspension road. Anchoring of the anchor in the hole is carried out by ampoule, injection or ampoule-injection methods.

The rope anchor can be made in various modifications:

AKS-1 is a standard rope anchor used as a second–level anchor in conjunction with first-level anchors or frame fasteners, it can also be used for foundation-free installation of equipment (belt, scraper conveyors, pumps, etc.)

AKS-2 is a rope anchor with an increased bearing capacity compared to AKS–1 threaded connection due to a reduced thread pitch up to 9 mm.

AKS-3 is a rope anchor with an increased bearing capacity of the threaded connection compared to AKS-2 due to the use of metric threads.

AKS-4 is a rope anchor with an air outlet tube designed for pumping the fixing compound into the hole.

AKS-5 is a rope anchor with a suspension coupling, designed for the installation of a monorail suspension road (MPD), as well as suspension of goods for various purposes.

Completeness
AKS-1

  • reinforcing rope;
  • thickening nodes;
  • coupling with a thread pitch of 11mm;
  • nut with a thread pitch of 11mm;
  • stiffness tube;
  • wire winding;
  • passport.

AKS-2

  • reinforcing rope;
  • thickening nodes;
  • coupling with a thread pitch of 9mm;
  • nut with a 9mm thread pitch;
  • stiffness tube;
  • wire winding;
  • passport.

AKS-3

  • reinforcing rope;
  • thickening nodes;
  • coupling with metric thread in 4.5mm increments;
  • nut with metric thread in 4.5 mm increments;
  • stiffness tube;
  • wire winding;
  • passport.

AKS-4

  • reinforcing rope;
  • thickening nodes;
  • coupling with a thread pitch of 11mm;
  • nut with a thread pitch of 11mm;
  • stiffness tube;
  • air vent tube;
  • wire winding;
  • passport.

AKS-5

  • reinforcing rope;
  • thickening nodes;
  • coupling-suspension;
  • stiffness tube;
  • bolt with nut;
  • wire winding;
  • passport.

Specifications

The name of the indicator

Meaning

АKS-1 АKS-2 АKS-3 АKS-4 АKS-5
Temporary tensile resistance of the anchor material, MPa, not less 240
Bearing capacity, kN, not less 210 230 250 210 250
Diameter of the hole, mm 28-30
Rope length, m 3 - 20
Rope diameter, mm 15,5
Permissible load on the suspension, kN, no more 70
- diameter of the coupling hole, mm 15,5
- coupling length, mm 120, 140
- thread pitch on the shank (coupling), mm 11 9 4,5 11
The method of fixing in the hole ampoule injection ampoule
Method of sealing the mouth of the hole hydraulic with outer tube foam sealing hydraulic with outer tube

Meets the requirements of TU 3142-002-16375400-2015 and GOST 31559-2012


Our specialist will answer your questions

name